YOOGU reinforced epoxy iron red anti-rust paint: It is a heavy anti-corrosion epoxy anti-rust paint with mica iron oxide as the main anti-rust pigment. It is carefully developed from epoxy resin, mica iron oxide, anti-rust pigment with various imported additives. The coating has good salt spray resistance, moisture and heat resistance, water resistance, and good adhesion and physical and mechanical properties. The paint film has excellent durability, wear resistance and moisture resistance due to its content of mica iron oxide. Epoxy mica iron oxide paint is not easy to damage and is easy to carry. It can be pre-coated in the factory and then re-coated after arriving at the construction site. It also has extremely low requirements for surface treatment. This anti-corrosion thick paste primer, intermediate paint or topcoat provides extremely strong protection in high-performance coatings.

The construction is convenient, fast, simple, and can be sprayed directly on the surface of new or old metal materials;

Anticorrosion materials have high-quality industrial anticorrosion coatings, which are green and environmentally friendly coatings, with excellent corrosion resistance, low temperature flexibility and safe use;
Strong adhesion and good adhesion with other high-performance topcoats;
Excellent durability resistant to high temperature environments;
Excellent corrosion resistance. Excellent wear resistance and adhesion;
Easy to construct, brushing, rolling and spraying can be used;
No harmful heavy metals such as lead, chromium, mercury are added.

Epoxy mica iron oxide paint is suitable for all kinds of metal materials (color steel tiles, aluminum, stainless steel, iron doors, stairs), metal storage tanks, metal pipes, steel structure brackets, metal equipment and other bases. It has been widely used throughout the country and is the best heavy-duty anti-corrosion of metal roofs today.

Construction method

1. The YOOGU reinforced epoxy mica anti-rust paint of this product needs to be used with primer and topcoat, and the construction can be done by spraying, rolling, brushing and other methods.

2. First, remove the floating rust, dust, oil stains, garbage, etc. on the base surface, and repair and level the rust-through areas.
3. On the cleaned base surface, apply or spray a functional automatic rust removal primer. The coating is uniform and has no exposed bottom, and the drying time is more than 8 hours.
4. Brush or spray the YOOGU reinforced epoxy mica anti-rust intermediate paint, the coating is uniform and has no exposed bottom, and the drying time is more than 8 hours.
5. Brush or spray YOOGU acrylic anticorrosion topcoat, the coating is uniform and has no exposed bottom, and the drying time is more than 36 hours to be accepted (the surface can be adjusted in color).

 

Construction instructions

Surface treatment: The front-channel paint film should be completely dry and remove all oil and debris from the paint film.

Mixing ratio: Single-component coating, stir well after opening the packaging.

Limitation: The temperature of the substrate must be 3℃ above the dew point. The relative humidity shall not be greater than 85%.

Coating method: airless spraying: nozzle diameter: 0.2~0.4mm

Spray pressure: 15~18MPa

Diluent XC108

Dilution amount: 0-5% (by weight of coating)

Air spraying: nozzle diameter: 2.0~2.5mm

Air pressure: 0.3~0.4MPa

Tool cleaning: XC108

Supporting coatings: zinc-rich epoxy primer, functional automatic rust removal primer, polyurethane high-end topcoat, acrylic anticorrosion topcoat, etc.

Packaging specifications: 20-22 kg canned (related to color).

Shelf life: 12 months.