The exterior wall specialized waterproof coating is a two-component waterproof coating processed from imported environmentally friendly emulsion and high-quality pigments and fillers. This coating is designed with full consideration for household environmental requirements, making it the preferred choice for home decoration waterproofing materials. The product features good thixotropy, adhesion, storage stability, excellent water resistance, alkali resistance, is easy to construct, non-toxic, odorless, and green environmentally friendly.

Excellent water resistance, alkali resistance, adhesion, and continuous fusion performance. Superior anti-aging and weather resistance. Good hiding power, easy construction. The coating film is smooth, delicate, does not peel off, does not fall off, is stain-resistant, and easy to clean.

Executive Standard: National Standard GB/T9755-2001 "Synthetic resin emulsion coatings for exterior wall"; National Standard GB6566-2001 "Limit of radionuclides in building materials".

Suitable for exterior walls of various concrete structures. It can be used on exterior walls (including cracks, window frames, balconies, canopies, wall roots, rainwater pipe interfaces, etc.), top slabs, basements, bathrooms, and various cement isolation piers.

Confirm the construction area of the exterior wall, and treat the base surface of the old and new walls differently.

For those with cracks in the exterior wall, a separate waterproof reinforcement layer is required.
The base surface of the construction must be flat, firm, dry, clean, and uneven areas can be filled with water-resistant putty, and the base surface has no oil stains and no floating ash. 
The waterproof coating of the exterior wall is used to paint the overall wall twice, and the construction is staggered vertically, with a dry-fixing time of 6-8 hours in the middle.
If the exterior wall needs to be beautifully decorated, the putty should be scraped twice, and the construction should be staggered vertically, with a drying time of 4-6 hours in the middle.
After the putty layer is dry and solid, the exterior wall decoration latex paint is applied on both sides of the bottom, and the surface color can be adjusted according to customer requirements.

Construction instructions
The moisture content of the new plastered wall should be less than 10% and the PH value should be less than 10. 
It can be sprayed, painted, and brushed during construction. It is generally brushed twice, and the coating time is 2-4 hours apart. 
When using, the paint should be stirred evenly and diluted with 5%-15% water. 
It is advisable that the temperature of the construction site is not lower than 4℃, and construction below 0℃ is strictly prohibited. 
After the construction is completed, the equipment should be washed with water immediately.