Solution

The all-round waterproof way, an extraordinary waterproof experience.
Steel structure waterproof Concrete Roof Waterproofing Sink Roof Waterproof Exterior Roof Waterproofing Kitchen And Bathroom Roof Waterproof
Exterior wall waterproof Exterior wall waterproof Exterior wall waterproof Exterior wall waterproof Exterior wall waterproof Exterior wall waterproof

Scope Of Application

Suitable for exterior walls of various concrete structures, it can be used for exterior walls (including cracks, window frames, balcony, awnings, wall bases, rainwater pipe interfaces, etc.), roof panels, basements, bathrooms, various cement isolation piers, etc.

Product Description

Exterior wall waterproof coating is a two-component waterproof coating made of imported environmentally friendly lotions and high-quality fillers. This coating is designed to fully consider the environmental protection requirements of the family and is the first choice for home decoration waterproof materials. The product has good thixotropy, adhesion, storage stability, excellent water resistance and alkali resistance, convenient construction, non-toxic and odorless, and green and environmentally friendly.

Product Features

Excellent water resistance, alkali resistance, adhesion and continuous fusion performance.

Excellent anti-aging and weathering properties.

Good hiding power and easy construction.

The coating is smooth and delicate, does not peel off, does not fall off, is dirt-resistant and easy to clean.

Technical Reference

Standard Construction Process

Base surface pretreatment:

During construction, carefully clean the construction base surface, polish and remove rust if rust and corrosion occur in the sink, and clean it up.

It is necessary to ensure that the base surface of the sink is flat, the firmware is free of looseness, rust, oil, dust, and water are not allowed to keep it clean. Firmware that has loose base surface must be replaced or reinforced.

For concrete: For uneven base surfaces of the soil sink, thicken the cement glue and level it with a batch knife. The thickness of the batch stop is less than 5mm. Note that the batch stop should not be too thick each time. The additional layer of this product should be used first in the cracks. The Yin-Yang corner hard seat arc treatment is used and waterproof additional layer treatment is used.

 

Construction preparation:

Determine the parts that need to be waterproofed and the width of the waterproof layer, and cut the polyester cloth of the corresponding width.

The paint needs to be stirred evenly when used, but there is no need to dispense water or auxiliary materials separately, and it can be applied directly.

During construction, it can be done in a brush, rolling and scraping manner. Relevant working tools should be prepared and necessary measures for labor protection should be taken.

During construction, the construction base is carefully cleaned, and the outer wall decorative layer has fallen and layered, cracked and aging parts are removed, and the garbage is cleaned.

Check the walls with ceramic tiles on the exterior wall, replace the loose and fall off tiles, and re-repair and seal the holes.

Whether it is waterproof coating or waterproofing of exterior wall transparent glue, it is necessary to ensure that the base surface of the exterior wall is flat, oil-free, dust-free, and water-free to keep it clean.

For those with large cracks in the exterior wall, a V-shaped groove needs to be chiseled for waterproofing additional layers before the exterior wall is fully waterproofed.

For the uneven base surface of the concrete exterior wall, thicken the cement glue and level it with a batch knife once. The thickness of the batch stop is less than 5mm. Note that the batch stop should not be too thick each time. The additional layer of this product should be used first in the cracks. The Yin-Yang corner hard seat arc treatment is used and waterproof additional layer treatment is used.

Determine the parts that need to be waterproofed and the width of the waterproof layer, and cut the polyester cloth of the corresponding width.

The paint needs to be stirred evenly when used, but there is no need to dispense water or auxiliary materials separately. It can be applied directly.

During construction, it can be done in a brush, rolling and scraping manner. Relevant working tools should be prepared and necessary measures for labor protection should be taken.

Case Construction Comparison

Tel: 0755-89212007

Fax: 0755-89212007

EMail: shili.yuan@yougufangshui.com

Address: Qichuang Low-carbon Park, No. 1034, Longgang Avenue (Ping Lot), Longgang District, Shenzhen

Scan To Enter The Mobile Terminal
Copyright © Shenzhen Yoogu Building Waterproof Co., Ltd.