YOOGU water-resistant water-based waterproof coating, is a two-component high-performance new waterproof coating made of organic polymer powder and inorganic powder composite, it has the advantages of high elasticity, water resistance, weather resistance, durability, Polyester cloth with the use of high strength and toughness can form a waterproof layer. Sink is the most prone to leakage of water in metal and concrete structures, degumming around the water inlet, rust perforation, rust, weld seam and so will cause water leakage, the product for the long-term use of the sink in wet conditions, soaking water first material .

Is a water-based, non-toxic, tasteless, harmless, non-flammable, non-corrosive green products.
Long-term soak water, weather resistance, anti-aging, tensile, UV resistance, good acid and alkali resistance.
Can be used directly on the substrate surface, without the need to set up a protective layer, can be exposed directly to use, with different materials, the base surface of a strong combination of bonding.
After curing the product is flexible at -35 ℃ to +120 ℃, curing speed, good adhesion.
Without a protective coating, the coating material is free to stretch and compress.
Liquid cold construction, with the surface to form the perfect seamless waterproof system.
Anti-UV, surface and waterproof layer have good weathering performance.
Can be used for a variety of complex nodes, easy to construct.
Long-term water immersion, long-term salt water, alkaline water and low acid corrosive sewage soak.

Applicable to all kinds of metal structures and concrete structures sink, gutter, foundation pit, reservoir, landscaped pool and so on.

Three coated with a waterproof construction process
1. Waterproof paint Stir according to the ratio, the base surface of the trash clean, so that the base surface is flat, dust-free, anhydrous oil.
2. A Tu: In the well-cleaned surface brushing concrete special high flexibility flexible acrylic base waterproof coating together.
3. A cloth: In the primary paint is still wet, the cut will be a good polyester fabric tile in the grass-roots paint, with brush compaction, the grassroots coating penetration of polyester cloth.
4. Second coating: Followed by the surface of the polyester cloth again painted concrete dedicated high elastic flexible acrylic basement waterproofing paint, so that the grassroots coatings and polyester cloth fully penetrate to ensure that can not afford to drum, do not wrinkle, the two Tuishe Fully integrated into a seamless cloth as a whole waterproof layer, dry solid 8 hours.
5. Three-coated: In the dry solid two coated with a cloth-based surface, once again painted concrete dedicated high-elastic acrylic surface waterproof coating together, as well as dry solid acceptance.