YOOGU kitchen series for home improvement and renovation project, and developed a green environment-friendly waterproof system, is composed of polyester cloth three coated with a seamless waterproof system. Water-proof paint system 100% pure acrylic polymer formulations, in line with "harmful substances limit" and "drinking water safety evaluation criteria" two national standards, can be directly contacted with drinking water. Green products for environmental protection, non-toxic, tasteless, water resistance, friction, closed tight and durable, with amazing adhesion, and glass will not peel after bonding, is drinking water engineering, exterior engineering, kitchen and home improvement Project of choice products. Through the waterproofing primer and rigid flexible coating on the surface of the flexible organic combination of rigid and flexible to form a coating, to maximize the coating adhesion, density, ductility and other physical and chemical properties, effectively improve The coating waterproof and wear-resistant effect, at the same time for the surface of the tile paste to provide the ideal base environment, from the inside out for the home improvement waterproof system to provide the perfect solution.

The indicators are in line with national drinking water and interior decoration materials, hazardous materials testing standards;

Green, non-toxic, tasteless, non-polluting, water-resistant, abrasion-resistant, closed tight and durable, corrosion-resistant, anti-aging, weatherability,

Can be used as the interface material of the outer wall, especially for reservoir and swimming pool repair works, do not have to do the original mosaic and tiles off, just use the system directly after cleaning the surface, saving both maintenance costs and high efficiency ;

The use of up to 20 years, 6 years of quality assurance

limit index of harmful substances

Table 2 safety indicators for water supply and distribution equipment and protective materials for domestic drinking water

Suitable for basement, swimming pool, kitchen, bathroom, wall waterproofing. Can also be used as the outer wall interface material.

1. the base surface pretreatment
First of all, the working face should be carefully and carefully cleaned before construction. Make sure the base surface is flat and the firmware is free of looseness, no loose mortar, no oil, no dust and no clear water to keep it clean. The loose surface of the firmware or mortar must be cleaned, replaced or reinforced. If the surface of the mortar appears chalking phenomenon, should be re-laying mortar layer or brushing concrete interface agent until the surface smooth, smooth, non-powdering.
 
2. ingredients method
The system used to the product, according to the ratio has been placed in a good package, please follow the ingredient instructions on the back of the barrel ingredients. Open the plastic bucket will be all the raw materials within the package removed from the bucket, first liquid material into the plastic bucket, and then slowly poured into the bucket powder, while stirring with an electric mixer to no caking, so that the slurry standing aging 3 minutes, then stir for about 30 seconds to use, adjust the slurry after use within 45 minutes.
 
3. construction technology
(1) In the dry base surface before construction, should be wet base surface, and no water, you can construction.
(2) a Tu: brushing a clean YOOGU kitchen dedicated waterproof primer slurry on the well-cleaned base until dry.
(3) two coating: to be a dry coating, brushing a YOOGU kitchen dedicated waterproofing slurry, brushing each operation should not exceed the length of 30cm, to avoid rapid drying due to slurry and affect the next process Adhesion.
(4) a cloth: in the case of a fully wet coating, quickly cut a good polyester cloth natural tiling in the coating to ensure that the polyester cloth and pulp fully integrated, no wrinkles, no hollowing, While maintaining a certain degree of relaxation.
(4) Three-coated: Immediately after the surface of the polyester cloth is wet, brush a YOOGU special waterproof medium-sized slurry for kitchen and bathroom to ensure that the slurry is uniform, full and leak-free, Layer integration into one, even dry solid.
The company is located in: