YOOGU polyurethane anti-corrosion high level paint (heavy anticorrosive material) : it is made of water-based modified polyurethane resin as film base material, adding mica ferric oxide and other additives. Micaceous iron oxide microstructure as flake mica, its only a few microns thickness and diameter of tens of microns, its high temperature resistance, alkali resistance, acid resistance, non-toxic, lamellar structure can prevent medium permeability and enhance the anticorrosion performance, and low shrinkage rate, it is a good high-level anti-corrosion paint, (can also be used in paint coating).

Due to the unique shielding structure of the scales in the upper and lower layers of the coating, it has the following characteristics:
Excellent resistance to medium permeability and good wear resistance;
The thermal expansion coefficient is small when the curing time is reduced and the film is solidified.
Good adhesion to the substrate, good temperature resistance,
It is not only excellent in anticorrosion, but also has strong adhesion.
The anticorrosive material has high quality industrial anticorrosion coating, it belongs to green environmental protection coating, the specific excellent corrosion resistance, low temperature flexibility, use safety;
It has good adhesion with other high performance surface paint, and it can protect the steel in the presence of corrosion and corrosion inhibition.
The surface anticorrosion coating can be adjusted according to customer's requirement;

Widely used throughout the country, metal materials such as steel, aluminum, stainless steel, iron doors, staircases, metal storage tanks, metal pipes, steel supports and metal equipment are the best metal roofing Heavy duty antisepsis

The construction method
1. The product YOOGU polyurethane top anticorrosive finishing coat needs to be combined: the primer and intermediate paint are better for use, and can be used for spraying, rolling, painting, etc.
2. First, remove rust, dust, oil, garbage, etc. from the base surface, and repair and smooth the rust part.
3. On the clean base surface, the coating or spraying functional automatic rust removing primer, the coating is uniformly without dew, and the dry time is more than 8 hours.
4. Coated or sprayed with YOOGU reinforced epoxy mica anti-rust intermediate paint, the coating is uniform without dew, and the dry time is more than 8 hours.
5. Coating or spraying YOOGU polyurethane top anticorrosive surface paint, the coating is even without dew, and the dry time is over 36 hours before acceptance (surface adjustable color).
6. This process USES equipment, steel girder and pipeline anti-corrosion;
specifications
Surface treatment: the front paint film should be completely dry and remove all the oil and debris from the paint film.
Mixing ratio: single group of paint, open the package after full stirring evenly can be used.
Limitations: the substrate should be higher than 3 ℃ above the dew point temperature. Relative humidity is not greater than 85%.
Coating method: airless spray: nozzle diameter: 0.2 ~ 0.4mm.
Extrusion pressure: 15 ~ 18MPa.
Thinner XC108
Dilution: 0 ~ 5% (in paint weight)
Air spray: nozzle diameter: 2.0 ~ 2.5mm.
Air pressure: 0.3 ~ 0.4mpa.
Tool cleaning: XC108.
Supporting coating: zinc rich epoxy primer, functional automatic rust removing primer, epoxy mica iron red intermediate paint, acrylic anticorrosive paint, etc.
Packing specification: 20 ~ 22 kg (related to color).
Shelf life: 12 months.