Concrete hardened and wear-resistant sealable floor, is a liquid environmental protection, water-based floor materials; It is an infiltration, sealing and hardening material; It is an infiltration, sealing and hardening material; Can infiltrate into the inside of the concrete compound and has condensation of concrete contains half hydrated cement, ca2, silica and other material through a series of complex chemical reactions that produce hard material, these compounds will eventually increase the compactness of concrete surface layer, thus improve the strength of the concrete surface layer, hardness, wear resistance, permeability resistance, etc.

Complex chemical reaction can jam the end products, solid seal (carborundum floor, terrazzo floors) of concrete pore structure and strength increase with the increase of surface hardness, compactness of improve the permeability resistance increase. Reducing the water flow path, which is to reduce the invasion of harmful substances, thus greatly enhancing the anti-chemical resistance of concrete (emery floor, terrazzo floor). Therefore, the concrete sealing agent can bring long seal, strong, wear-resisting, dustproof concrete (emery floor, water grindstone floor) surface.

Hard and wear-resistant: best to improve mohs strength to 8-9 degrees.

Effective seal: insulate solid and liquid impurities into concrete.
Anti-chemical erosion: inhibits the entry of chemicals into concrete.
Dust prevention: improve the surface density, effectively prevent the concrete surface from producing dust.
Good aging resistance: no yellowing and whitening. The average age is 15 to 20 years.
Respiratory function: allow the free flow of gases and liquids and avoid the problem of peeling and micro-cracks on the ground.
Permanent gloss: persistent friction in use of hard ground, the brighter it is.
Simple maintenance: simple cleaning, no wax removal, and high maintenance costs.
Safe and environmental protection: colorless, tasteless, non-toxic, water-based environmental protection products.
Penetration strength: excellent permeability, permeable concrete 5-8mm.

Concrete hardening dust seal curing floor wear-resisting is applicable to any need of inside and outside clean environment, dustproof, easy to clean, hard, high abrasion resistance, resistance to weak chemical erosion, high anti permeability for the plane of the old and new concrete surface, such as emery wear-resisting flooring, terrazzo floor, stone is, such as underground parking lots, roads, factories, shopping centers, warehouses, parking lots, such as service station, hangar, cargo distribution field area.

1. Polishing base surface: using a professional polishing machine to make a comprehensive grinding of 100 resin grinding disc (which can be polished after wet treatment with water), exposing the concrete to clean the fresh surface.
2. Clear the base surface: clean the dirt that is produced by grinding. If the ground is polished, the water needs to be cleaned thoroughly.
3. Spray material: the concrete sealing hardener shall be sprayed evenly on the ground (per square meter: 0.4kg-0.5kg) after polishing, and the full reaction will be 2-4 hours.
4. Clean base surface: when the surface begins to thicken, wet the ground with clear water for 2 hours, then remove all clear water and naturally dry for more than 12 hours.