Application range

Suitable for basement, swimming pool, kitchen, toilet, exterior wall waterproofing, etc. It can also be used as an interface material for external walls.

Product description

YOOGU kitchen and bathroom series is aimed at home renovation and renovation projects, and a set of green environmental protection waterproof system developed is a three-coat one-cloth seamless waterproof system composed of polyester cloth. The waterproof coating is a 100% pure acrylic polymer formula, which meets the two national standards of "Determination of Hazardous Substances" and "Safety Evaluation Standards for Drinking Water" and can be in direct contact with drinking water. The product is green, environmentally friendly, non-toxic, odorless, water-resistant, friction-resistant, tightly sealed and durable, has amazing adhesion, and will not peel off after bonding with glass.It is a drinking water project, exterior wall project, kitchen and bathroom and home improvement Engineering's first choice. Through the combination of the rigidity of the primer of the waterproof material and the flexibility of the surface coating, a rigid and flexible coating film is formed to maximize the physical and chemical properties of the coating such as adhesion, compactness, and ductility, and effectively improve The waterproof and abrasion resistance of the coating is provided. At the same time, it provides an ideal base surface environment for the surface layer of the ceramic tile. It provides a perfect system solution for waterproofing the home improvement from the inside out.

Features

All indicators are in line with national standards for detection of harmful substances in drinking water and interior decoration materials;

Green environmental protection, non-toxic, tasteless, pollution-free, water resistance, friction resistance, tight and durable sealing, corrosion resistance, aging resistance, weather resistance, adhesion, etc., never fall off;

It can be used as the interface material of the external wall, especially suitable for the restoration of reservoirs and swimming pools.It is not necessary to remove the original mosaics and tiles, just use the system after washing the surface, which saves maintenance costs and is highly efficient ;

The service period is up to 20 years and the quality assurance is 6 years.

Construction method (three coats and one cloth)

Standard construction process

1. Base surface pretreatment:

Carefully clean the working surface first during construction. You must ensure that the base surface is flat, the firmware is free of looseness, no loose mortar, no oil, no dust, and no clear water to keep it clean. The loose firmware or mortar on the base surface must be cleaned, replaced or reinforced. If the mortar on the base surface is powdered, the mortar layer should be laid again or treated with a special interface agent for coagulants until the surface is smooth, smooth and free of powdering.

2. Ingredients method:

The products used in this system have been put into the packaging according to the proportion. Please follow the ingredients instructions on the back of the packaging barrel for ingredients. Open the plastic bucket and take out all the raw materials from the bucket.Inject the liquid material into the plastic bucket first, and then slowly pour the powder into the bucket.At the same time, stir with an electric mixer until there is no agglomeration. After 3 minutes, it can be used by stirring for about 30 seconds. The adjusted slurry should be used up within 45 minutes.

3. Construction process:

(1) Before construction on a dry base surface, the base surface should be moistened first, and construction can be carried out until there is no clear water.

(2) One coat: Apply a waterproof primer for YOOGU kitchen and toilet to the cleaned base surface until it is dry.

(3) Two coats: After the first coat is dried and solidified, apply a YOOGU kitchen and toilet special waterproof medium coating slurry. The length of each brushing operation should not exceed 30cm to avoid affecting the next process due to the rapid drying of the slurry. Of adhesion.

(4) One cloth: Under the condition that the previous coating is fully moistened, quickly cut the cut polyester cloth naturally on the coating to ensure that the polyester cloth and the slurry are fully combined, without wrinkles and no hollow, At the same time maintain a certain degree of slack.

(5) Three coats: After wetting the surface of the polyester cloth, apply a YOOGU kitchen and toilet special waterproof medium coating paste to ensure that the paste is uniform, full, and no leakage brush, and the surroundings are tightly closed, so that it is coated with the previous one The layers are integrated into one body and even dry.

Case construction comparison